itthon> Blog> Metal Corrugated Sheet Cold Roll Sheet Forming Machine

Metal Corrugated Sheet Cold Roll Sheet Forming Machine

September 13, 2024
Model NO.: corrugated sheet forming machine
Certificate: ISO9001:2000/Ce
Power Source: Electric
Feature: Automation
Advantage: Simple Structure
Warranty: 24 Months
Forging Forming Method: Mold Forging
Suitable Material: Q235, Q345, G550 for Gi, PPGI, Gl, PPGL
Suitable Thickness: 0.14mm to 2mm
Machine Type: Cold Roll Forming Machine
Final Product: Metal Tile, Roof Tile, Corrugated Sheet, Purlin
Trademark: STW
Transport Package: Machine in 40′′gp,Other Accessories in Wooden Case
Specification: CE
Origin: China
HS Code: 84552210
Machine Specification
No.       item Parameter(all is subject to our final design)
1
 
Suitable raw material Type Common galvanized & pre-painted steel
Yield strength 235MPa(or other high strength steel)
Thickness(mm) 0.4-0.7
width(mm) According to final design
2 Manual uncoiler's capacity 5tons
3 Forming speed(m/min) About 18-22m/min
4 Main motor power(KW) 7.5kw
5 Hydraulic power(KW) 3kw
6 Forming roller groups  Around18-20 groups
7 Raw material of forming roller High quality No.45 steel
8 Raw material of cutting blade Cr12mould steel with quenched treatment
9 controlling system Mitsubishi PLC& converter
10 Suitable industrial voltage  According to your special requirement
11 Machine dimensions(L*W*H) 6.8m×1.8m×1.52m
12 Machine weight About 9-10tons
Roof Panel Roll Froming Machine; Steel Corrugated Sheet Forming Machine; Steel Sheets Forming Machine; Roll Forming Machine; Forming Machine; Cold Roll Forming Machine; Steel Corrugated Forming Machine.


Components:
The Uncoiler and Its Base
Coil Sheet Guiding and Adjusting Equipment
Film Covered Device
Main Roll Forming System
Post-Cutting Device
Hydraulic Station
PLC Control System
Support Table
The Technical Parameters:
Suitable Raw Material: Color Steel Sheet; Galvanized Steel Sheet
Thickness of The Material: 0.4m to 0.7mm
Yield Strength of Material: 235mpa
Uncoiler's Loading Capacity: Max. Capacity: 5000kgs. (Can Be Increased to Be 10 Tons)
Forming Speed: About 15m/Min
Main Motor Power: 5.5kw(Depend on Final Design)
Hydraulic Station Power: 2.2kw(Depend on Final Design)
Controling System: Mitsubishi PLC & Converter
Voltage: 380V, 3 Phase 60Hz or According to at Buyer's Requirment.
The Quantity of The Roller Group: At Lest 15 Groups(Depend on Final Design)
Machine Dimension: About 20m*1.5m*1.4m(Depend on Final Design)
Total Weight: About 10000kgs(Depend on Final Design)
Material of Roll Former System
Roller: High Grade No. 45 Forged Steel, Plated Hard Chromed on The Surface of Rollers
With Thickness 0.05mm.
Active Shaft Material: High Grade No. 45 Carbon Wrought Steel at Diameter 75mm.
Cutting Blade: Cr12 Mould Steel with Quenched Treatment.
Working Flow
Decoiling The Sheet---Guiding The Sheet---Covering The Film---Roll Forming---Measuring The Length---Cutting The Panel---Panels to The Supporter
Lépjen kapcsolatba velünk

Author:

Mr. tonja

Phone/WhatsApp:

18102979203

Népszerű termékek
You may also like
Related Categories

E-mailt küld a szállítónak

Tantárgy:
Mobiltelefon:
Email:
Üzenet:

Your message must be betwwen 20-8000 characters

  • Küldjön értesítést

Copyright © 2024 DONGGUAN TONJA INDUSTRIAL CO.LTD Minden jog fenntartva.

Azonnal kapcsolatba lépünk Önnel

Töltsön ki további információkat, amelyek gyorsabban kapcsolatba léphetnek veled

Adatvédelmi nyilatkozat: Az Ön adatvédelme nagyon fontos számunkra. Cégünk megígéri, hogy nem tesz közzé személyes adatait semmilyen kitettségnek az explicit engedélyekkel.

Elküld